04 Nov Researchers use 3-D printing to make optical fiber preform
04 Nov 2019
Sydney, Australia-based team also reports creation of “first” silica glass fibers drawn from additively manufactured preforms.
Researchers at two Australia universities have collaborated to develop a way to 3-D print a preform that can be drawn into silica glass optical fibers, for new types of telecommunications networks and other purposes.
The partnership from the University of Technology in Sydney and the University of New South Wales says that the new fabrication method “could not only simplify production of these fibers but also enable designs and applications that have not been possible before.” The work was first reported in Optics Letters (paywall).
“Making silica optical fiber involves the labor-intensive process of spinning tubes on a lathe, which requires the fiber’s core or cores to be precisely centered,” said John Canning who led the research team from the University of Technology in Sydney. “With additive manufacturing, there’s no need for the fiber geometry to be centered. This removes one of the greatest limitations in fiber design and greatly cuts the cost of fiber manufacturing.”
Canning’s group has, in collaboration with Gang-Ding Peng’s research team at the University of New South Wales in Sydney, report the creation of what they are calling “the first silica glass fibers drawn from 3-D printed preforms.”
“Additive manufacturing approaches such as 3-D printing are well suited to change the entire approach to fiber design and purpose,” said Canning. “This could, for example, broaden the applications of fiber optic sensors, which far outperform electronic equivalents in terms of longevity, calibration and maintenance but haven’t been widely deployed due to their expensive fabrication.”
Translating polymer 3-D printing to glass
The new achievement builds on earlier work in which the researchers used a polymer material to demonstrate the first fiber drawn from a 3-D printed preform. Applying this approach to silica has proved challenging due to immense material challenges including the high temperatures – more than 1900 °C (3450 °F) – needed to 3-D print glass.
“Thanks to a novel combination of materials and nanoparticle integration, we have shown it’s possible to 3-D print a silica preform,” said Canning. “We expect this advance to bring a flurry of activity, including other additive manufacturing approaches, to accelerate this field.”
In the latest work, the researchers used a commercially available direct-light projection 3-D printer [brand not specified]. This type of additive manufacturing is extremely precise and typically used to create polymer objects by using a digital light projector to polymerize photo-reactive monomers.
To create a silica object, the researchers added silica nanoparticles into the monomer at amounts of 50 percent or greater by weight. They designed a 3-D printed cylindrical object that contained a hole for a core. They then inserted a similar mix of polymer and nanoparticles into the hole, this time adding germanosilicate to the silica nanoparticles to create a higher refractive index. In this way, the integration of a range of dopants becomes possible.
Next, the researchers used a unique heating step called debinding to remove the polymer and leave behind only the silica nanoparticles, which are held together by intermolecular forces. Finally, raising the temperature further fused the nanoparticles into a solid structure that could be inserted into a draw tower where it is then heated and pulled to create the optical fiber.
The researchers used their new technique to fabricate a preform equivalent of a standard germanosilicate fiber that could be used to create multi- or single-mode fibers, depending on drawing conditions. Although they did observe high light losses in the initial fabricated optical fibers, they have since identified the causes for these losses and are working to address them.
“The new technique worked surprisingly well and can be applied to a range of glass material processing to improve other types of optical components,” said Canning. “With further improvements to limit the light losses, this new approach could potentially replace the conventional lathe-based method of making silica optical fibers. This would not only reduce fabrication and material costs but also lower labor costs because training and hazards are reduced.”
The researchers commented that they are interested in working with “a mainstream commercial fiber fabrication company” to improve and commercialize the technology. They also plan to explore other methods for accelerating 3-D printing by refining it for different applications.
Sorry, the comment form is closed at this time.